Home
Home
Home
Home
Home
Home
Paige

Surge Guard Lightning Arrester

Product #:PAG-57-1008

Mfg. Part #:270SSG

PAG-57-1008.jpg

Paige 270SSG Surge Guard Lightning Arrester

Paige

Surge Guard Lightning Arrester

Product #:PAG-57-1008

Mfg. Part #:270SSG

Description

Paige 270SSG Surge Guard Lightning Arrester. This lightning arrester is designed to protect Irrigation decoder two-wire paths and solenoids from power and lightning surges. It can also be used to protect Landscape Lighting fixtures. Irrigation industry solenoids were found to fail when exposed to an 8/20 micro-second pulse of 10,000 volts, or less. The addition of the Paige Electric Surge Guard allowed the same solenoids to survive a pulse of 20,000 volts. (Note: The TORO Spike-GuardTM solenoid survived at 20,000 volts, on its own.)

Feature Bullets

  • The internal gas tube is ISO 9000 certified and conforms to the standards of UL 497B. Handles up to 10,000 amperes with an 8/20 micro-second pulse. Activates at 75 volts.
  • Wired in parallel with solenoid(s), two-wire paths, or light fixtures as shown below.
  • Can withstand several lightning hits. The life of lightning arresters is a function of how hard they are hit and the frequency of the strikes.
  • Low cost. Reduces or totally eliminates the replacement of costly components.
  • Paige part number: 270SSG
  • Branch Availability

    content loaded

    Specifications

    • BrandPaige
    • ApplicationAll Purpose
    • MaterialAluminum
    • Commercial, Residential, or ProfessionalCommercial
    • Each Product Weight0.1 pound
    • Master Carton Quantity50
    • Minimum Sell Quantity1
    • Pallet Quantity1

    Parts & Schematics

    There are no parts or schematics available.

    Wholegoods

    There are no wholegoods available.