Home
Home
Home
Home
Home
Home
SPECK PUMPS

Normblock Multi Series Pump 10HP

Product #:SPK-10-6141

Mfg. Part #:NB715-1010F-000

SPK-10-6141.png

Speck Pumps NB715-1010F-000 Normblock Multi Series Pump 10HP; 3 Phase, 208-230/460V

SPECK PUMPS

Normblock Multi Series Pump 10HP

Product #:SPK-10-6141

Mfg. Part #:NB715-1010F-000

Description

The Normblock Multi Series is redefining the limits of plastic pumps. The Normblock Multi takes the non-corrosive and lightweight benefits of plastic higher than any other American manufacturer. This pump is ideally suited for aquatic facilities, fountains, water parks, aquaculture, and pools with elevated salt concentration.

Feature Bullets

  • Available in 7.5, 10, 15, 20, 25 & 30 HP Models.
  • Robust horizontal single stage design.
  • Superior slow (1750 rpm) running design reduces vibrations resulting in quiet operation.
  • Housing is made of high performance plastic (THK), corrosion resistant
  • Can be used with higher salt concentrations.
  • Heavy duty energy efficient totally enclosed fan cooled (TEFC) motor, Class F insulation, protection class IP 55. Sealed ball bearings need no lubrication.
  • Shaft coupling allows the motor to be replaced without replacing the mechanical seal.
  • A high wear, rugged Carbon/SIC EPDM mechanical seal allows for a long life
  • Equipped with stainless steel shaft extension.
  • Optional all plastic strainer tank for horizontal flooded suction applications.
  • Every pump is tested to factory & customer's specifications before leaving the Speck factory
  • Branch Availability

    content loaded

    Specifications

    • BrandSPECK PUMPS
    • Amps High Speed27.4
    • Shipping Dimensions50 x 38 x 30 inch
    • Amps Low Speed12.4
    • ApplicationPool
    • Commercial, Residential, or ProfessionalCommercial
    • Each Product Weight400 pound
    • Flow Rate Max450 gal/min
    • Master Carton Quantity1
    • MaterialPlastic
    • Minimum Sell Quantity1
    • Motor Speed3-Speed
    • Pallet Quantity1
    • PhaseThree
    • Service Factor1.25
    • UPC Code840182103829

    WARNING: The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov

    Parts & Schematics

    SPK-10-6141-sch.png
    content loaded
    Mfg #
    Product #
    Description
    Notes
    101
    101
    7201110111
    Casing CPL
    Product #:
    Mfg #: 7201110111
    161
    161
    7201116100
    Seal Housing
    Product #:
    Mfg #: 7201116100
    210
    210
    7201421042
    Pump Shaft CPL
    Product #:
    Mfg #: 7201421042
    230
    230
    7201123000
    Impeller (7.5HP) 225mm
    Product #:
    Mfg #: 7201123000
    230
    230
    7201123000A
    Impeller (10HP) 240mm
    Product #:
    Mfg #: 7201123000A
    341
    341
    7201434140
    Motor Lantern CPL BG 132
    Product #:
    Mfg #: 7201434140
    412
    412
    7201141201
    O-Ring - 355 x 5mm, NBR
    Product #:
    Mfg #: 7201141201
    412.1
    412.1
    7201141240
    O-Ring - 22 x 2mm, NBR
    Product #:
    Mfg #: 7201141240
    412.2
    412.2
    2923541220
    SPK-101-2687
    Product #: SPK-101-2687
    Mfg #: 2923541220
    Notes:
    4 Req.
    412.4
    412.4
    2711040109
    O-Ring - 31.5 x 2.5mm
    Product #:
    Mfg #: 2711040109
    433
    433
    7201143300
    Mechanical Seal (32mm) CPL - Carbon/SiC + EPDM
    Product #:
    Mfg #: 7201143300
    433
    433
    7201143302
    Mechanical Seal (32mm) CPL - SiC/SiC + EPDM
    Product #:
    Mfg #: 7201143302
    515
    515
    7201451500
    Shaft Collar
    Product #:
    Mfg #: 7201451500
    554
    554
    5871250800
    Washer - 8.4mm, SS
    Product #:
    Mfg #: 5871250800
    Notes:
    27 Req.
    554.2
    554.2
    5871251000
    Washer - 10.5mm, SS
    Product #:
    Mfg #: 5871251000
    Notes:
    8 Req.

    Wholegoods

    There are no wholegoods available.